ComAp InteliMains NT IM-NT-BB - Page 285

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
285
11.2.14.12 Setpoint: Timer channel 12
Group
Timer settings
Range [units]
[-]
Related FW
standard v3.1.0
Description
This setpoint adjusts the mode of the Timer channel #12. Output from this
channel is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
11.2.14.13 Setpoint: Timer channel 13
Group
Timer settings
Range [units]
[-]
Related FW
standard v3.1.0
Description
This setpoint adjusts the mode of the Timer channel #13. Output from this
channel is available in the combined output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
11.2.14.14 Setpoint: Timer channel 14
Group
Timer settings
Range [units]
[-]
Related FW
standard v3.1.0
Description
This setpoint adjusts the mode of the Timer channel #14. Output from this
channel is available in the combined output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
11.2.14.15 Setpoint: Timer channel 15
Group
Timer settings