InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
least one of the channels is active.
NOTE:
See the chapter Timers for more details about timers.
14.2.1.64 Binary output: TimerAct 5-8
This is combined output from timer channels 5-8. The output is closed if at
least one of the channels is active.
NOTE:
See the chapter Timers for more details about timers.
14.2.1.65 Binary output: TimerAct 9-12
This is combined output from timer channels 9-12. The output is closed if at
least one of the channels is active.
NOTE:
See the chapter Timers for more details about timers.
14.2.1.66 Binary output: TimerAct 13-16
This is combined output from timer channels 13-16. The output is closed if at
least one of the channels is active.
NOTE:
See the chapter Timers for more details about timers.
14.2.1.67 Binary output: TimerActiveCom
This is combined output from all timer channels. The output is active if at
least one timer channel is active.
To Next Page
Loading...