ComAp InteliMains NT IM-NT-BB - Group: Control Loops; Group: Mains Protect

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
319
12.1.5 Group: Control loops
12.1.5.1 Value: LSO
Group
Control loops
Units
%
Related FW
standard v3.1.0
Description
Control loop for active power in percentage.
12.1.5.2 Value: VSO
Group
Control loops
Units
%
Related FW
standard v3.1.0
Description
Control loop for reactive power in percentage.
12.1.6 Group: Mains protect
12.1.6.1 Value: MaxVectorS
Group
Mains protect
Units
º
Related FW
standard v3.1.0
Description
This is maximal measured value of vector shift of the mains voltage. The
value is reset to 0 automatically at the moment of closing the MGCB.
12.1.6.2 Value: ROCOF
Group
Mains protect
Units
Hz/s
Related FW
standard v3.1.0
Description
This is actual measured ROCOF.