ComAp InteliMains NT IM-NT-BB - Group: Load Shedding; Group: Analog CU

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
326
12.1.11 Group: Load shedding
12.1.11.1 Value: StatLdShed
Group
Load shedding
Units
-
Related FW
standard v3.1.0
Description
The value indicates the current load shedding stage. 0 indicates that the load
shedding is not active. See the chapter Load shedding for more details.
12.1.12 Group: Analog CU
12.1.12.1 Value: UBat
Group
Analog CU
Units
V
Related FW
standard v3.1.0
Description
Voltage at the controller power supply terminals.
12.1.12.2 Value: CPU Temp
Group
Analog CU
Units
ºC
Related FW
standard v3.1.0
Description
Temperature inside the controller (on the CPU).
12.1.12.3 Value: AIN CU-1
Group
Analog CU
Units
configurable
Related FW
standard v3.1.0
Description
This is the value of the analog input 1 of the controller. Analog inputs are fully
configurable so the name and units depend on configuration. In the default
configuration the input is used for oil pressure measurement.