ComAp InteliMains NT IM-NT-BB - Page 325

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
325
12.1.10.2 Value: ExtValue2
Group
Force value
Units
-
Related FW
standard v3.1.0
Description
This data object is intended for remote control of the IntelliMains via the
communication if some kind of data is to be passed into the controller.
This object can be written via the communication (e.g. Modbus) without any
limitation. Use GenConfig function Generate Cfg Image to get the
communication object number or register number of this particular value
object. See an example at the object ExtValue1.
12.1.10.3 Value: ExtValue3
Group
Force value
Units
-
Related FW
standard v3.1.0
Description
This data object is intended for remote control of the IntelliMains via the
communication if some kind of data is to be passed into the controller.
This object can be written via the communication (e.g. Modbus) without any
limitation. Use GenConfig function Generate Cfg Image to get the
communication object number or register number of this particular value
object. See an example at the object ExtValue1.
12.1.10.4 Value: ExtValue4
Group
Force value
Units
X
Related FW
standard v3.1.0
Description
This data object is intended for remote control of the IntelliMains via the
communication if some kind of data is to be passed into the controller.
This object can be written via the communication (e.g. Modbus) without any
limitation. Use GenConfig function Generate Cfg Image to get the
communication object number or register number of this particular value
object. See an example at the object ExtValue1.