ComAp InteliMains NT IM-NT-BB - 12 Values; Table of Values; Group: Mains Values

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
295
12 Values
12.1 Table of values
12.1.1 Group: Mains values
12.1.1.1 Value: MainsImport
Group
Mains
Units
kW
Related FW
standard v3.1.0
Description
This value shows actual power imported from mains. This value is used for
various purposes (e.g. peak shaving detremination etc.).
12.1.1.2 Value: MP L1
Group
Mains values
Units
kW
Related FW
standard v3.1.0
Description
Mains active power in phase L1.
12.1.1.3 Value: MP L2
Group
Mains values
Units
kW
Related FW
standard v3.1.0
Description
Mains active power in phase L2.
12.1.1.4 Value: MP L3
Group
Mains values
Units
kW
Related FW
standard v3.1.0