ComAp InteliMains NT IM-NT-BB - Mcb

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
64
ISLAND
ENABLE
PARALLEL
ENABLE
SYNCHRO
ENABLE
MFSTART
MGCBPARALCLOSE
SHORT DESCRIPTION
NO
YES
NONE
NO
MCB CLOSED
- Parallel operation is possible.
- Transfer with synchronization via InteliMains is
N/A
- Gen-sets will not be started when the Mains
fails.
- Gen-sets will synchronize directly to the Mains
(MGCB already closed), i.e. synchronization
transfer from Mains to Parallel
- MGCB will be closed if the MCB is closed
7.3.2 MCB
ISLAND ENABLE
PARALLELENABLE
SYNCHRO ENABLE
MFSTART
SHORT DESCRIPTION
YES
YES
REVERSE
YES
 Island and Parallel operation is
possible.
 Transfer with synchronization via
InteliMains is possible
 Gen-sets will be started when the
Mains fails.
YES
YES
REVERSE
NO
 Island and Parallel operation is
possible.
 Transfer with synchronization via
InteliMains is possible
 Gen-sets will not be started when the
Mains fails.
YES
YES
NONE
YES
 Island and Parallel operation is
possible. (Controller can transfer to
Parallel operation from Mains
operation.)
 Transfer with synchronization via
InteliMains is not possible
 Gen-sets will be started when the
Mains fails.
YES
YES
NONE
NO
 Island and Parallel operation is
possible. (Controller can transfer to
Parallel operation from Mains
operation.)
 Transfer with synchronization via
InteliMains is not possible
 Gen-sets will not be started when the
Mains fails.
YES
NO
NONE
YES
 Island operation is possible.
 Transfer with synchronization via
InteliMains is not possible
 Gen-sets will be started when the
Mains fails.