InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
12.1.2 Group: Bus values
12.1.2.1 Value: Bus freq
Bus frequency. The frequency is measured in the phase L3.
12.1.2.2 Value: Bus V L1-N
Bus voltage in phase L1.
NOTE:
The ratio between the voltage measured at the input terminals and the
displayed voltage is adjusted by the setpoint Bus VT ratio.
12.1.2.3 Value: Bus V L2-N
Bus voltage in phase L2.
NOTE:
The ratio between the voltage measured at the input terminals and the
displayed voltage is adjusted by the setpoint Bus VT ratio.
12.1.2.4 Value: Bus V L3-N
To Next Page
Loading...