InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
Cos-phi factor at the load. This value is computed indirectly from the values
Object P and Object Q.
12.1.3.4 Value: Object Load char
This value shows the characteristic of the load. The displayed value is R, L or
C.
12.1.4 Group: Gen-sets
12.1.4.1 Value: TotRun Q
This value shows total sum of reactive power of all gensets controlled by
corresponding IM-NT (e.g. in one logical group or in two logical groups linked
by Group link).
12.1.4.2 Value: TotRun PF
This value shows average of power factor of all gensets controlled by
corresponding IM-NT (e.g. in one logical group or in two logical groups linked
by Group link).
To Next Page
Loading...