InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
12.1.16 Group: Info
12.1.16.1 Value: Controller mode
This value contains actual controller mode. The controller mode is selected
by the setpoint Controller mode but the setpoint position can be overriden by
binary inputs Remote OFF, Remote MAN, Remote AUT or Remote TEST.
12.1.16.2 Value: SW Version
Major and minor firmware version number. E.g. value "2,4" means version
2.4. Release version number is not included.
12.1.16.3 Value: Application
Code of the application type. E.g. 1 for SPtM, 2 for SPI, 3 for MINT etc. The
value is intended for diagnostic purposes.
12.1.16.4 Value: SW Branch
Firmware branch code. Contains 1 in case of standard branches.
To Next Page
Loading...