InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
12.1.16.5 Value: PasswordDecode
This value contains encrypted serial number of the controller and
administrator password and is intended for retrieving of the lost password.
Send this number together with controller serial number to your distributor if
you need to retrieve your password.
12.1.16.6 Value: CAN16
Bits of this value show "1" if the controller receives messages from the
controller which has address corresponding with the bit position. Bit 0
represents address 1 etc. This value contains information about controllers
with addresses 1-16.
NOTE:
The bit which corresponds to the own controller is always set to "1".
12.1.16.7 Value: CAN32
Bits of this value show "1" if the controller receives messages from the
controller which has address corresponding with the bit position. Bit 0
represents address 17 etc. This value contains information about controllers
with addresses 17-32.
NOTE:
The bit which corresponds to the own controller is always set to "1".
To Next Page
Loading...