InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
12.1.16.8 Value: Reg16
Bits of this value show "1" if the controller which has address corresponding
with the bit position plays active role in the power management. Bit 0
represents address 1 etc. This value contains information about controllers
with addresses 1-16.
12.1.16.9 Value: Reg32
Bits of this value show "1" if the controller which has address corresponding
with the bit position plays active role in the power management. Bit 0
represents address 17 etc. This value contains information about controllers
with addresses 17-32.
12.1.16.10 Value: GL16
Bits of this value show "1" if the controller which has address corresponding
with the bit position has GCB closed. Bit 0 represents address 1 etc. This
value contains information about controllers with addresses 1-16.
12.1.16.11 Value: GL32
Bits of this value show "1" if the controller which has address corresponding
with the bit position has GCB closed. Bit 0 represents address 1 etc. This
value contains information about controllers with addresses 17-32.
To Next Page
Loading...