InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
12.1.16.12 Value: Breaker state
Code of the current state of the breaker control. The text representation of
each code can be obtained by the procedure described at the value Timer
text.
12.1.16.13 Value: Timer text
Code of the currently running system process timer.
The list of this value can be found in the cfg image which can be generated
using GenConfing (open archive which you want to inspect and click on File-
Generate Cfg Image-Generate Cfg Image (Comm. objects)... ). Text file is
generated, open it and find the communication object of your interest.
According type of the list is found next to the name of the communication
object. Search for the name of the list (e.g. LIST#3) and in the lower part of
document there is a list of corrensponding values included in that particular
list.
NOTE:
Remaining time of the timer is available in the value Timer val.
12.1.16.14 Value: Timer val
The value contains remaining time of the currently running system process
timer. The name of the timer is available in the value Timer text.
12.1.16.15 Value: NextTime1-4
To Next Page
Loading...