ComAp InteliMains NT IM-NT-BB - Page 284

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
284
See the chapter Timers for more details about timers.
11.2.14.9 Setpoint: Timer channel 9
Group
Timer settings
Range [units]
[-]
Related FW
standard v3.1.0
Description
This setpoint adjusts the mode of the Timer channel #9. Output from this
channel is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
11.2.14.10 Setpoint: Timer channel 10
Group
Timer settings
Range [units]
[-]
Related FW
standard v3.1.0
Description
This setpoint adjusts the mode of the Timer channel #10. Output from this
channel is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
11.2.14.11 Setpoint: Timer channel 11
Group
Timer settings
Range [units]
[-]
Related FW
standard v3.1.0
Description
This setpoint adjusts the mode of the Timer channel #11. Output from this
channel is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.