ComAp InteliMains NT IM-NT-BB - Page 52

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
52
FUNCTION NAME
(ALPHABETICAL
ORDER)
BRIEF DESCRIPTION
RELATED SETPOINTS, INPUTS AND
OUTPUTS
Protections
AA
Protections in the controller are very
complex function with many settings.
Please refer to a separate chapter for
more information about protection
functions in InteliMains.
Horn Timeout
BinInp delay 1
BinInp delay 2
BinInp delay 3
ForceBlockDel1
ForceBlockDel2
ForceBlockDel3
ResetActAlarms
Force block 1
Force block 2
Force block 3
VMAINS <>
VMAINS <>
FMAINS <>
FBUS <>
MAINS FAIL
BUS FAIL
VECTORSHIFTTRP
VMAINS <>
HORN
ALARM
HORN FLASHING
ALARM FLASHING
COMMON WRN
COMMON MPR
COMMON FLS
COMMON MP
COMMON AL
COMMON HST
COMMONACTLEV 1
COMMONALLEV 1
COMMONACTLEV 2
COMMONALLEV 2
Mns2POvrldProt
OverldStrtEval
2POvrldStEvDel
Mns2Inom prot
Mains2Inom del
Mains >V MP
Mains <V MP
Mains V del
Mains Avg>V MP
Mains >f
Mains <f
Mains f del
VectorS prot
VectorS CB sel
VectorS limit
ROCOF Win
ROCOF df/dt
Bus >V
Bus <V
Bus V del
Bus >f
Bus <f
Bus f del
BusMeasError
Pulse Counters
The controller offers up to 4 pulse
counters that can count incomming
pulses of at least 100 ms (high and low)
length with various conversion. The
counted value is stored in the controller
and can be displayed.
ConvCoefPulse1
ConvCoefPulse2
ConvCoefPulse3
ConvCoefPulse4
PULSECOUNTER 1
PULSECOUNTER 2
PULSECOUNTER 3
PULSECOUNTER 4
Regulation
functions
AA
There is whole variaty of regulation
functions in the controller. Please refer to
a separate chapter to find out more.
Freq gain
Freq int
Angle Gain
Load Ramp
Load gain
Load int
Voltage gain
Voltage Int
PF gain
PF int
i
i