ComAp InteliMains NT IM-NT-BB - Page 55

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
55
FUNCTION NAME
(ALPHABETICAL
ORDER)
BRIEF DESCRIPTION
RELATED SETPOINTS, INPUTS AND
OUTPUTS
Timers
AA
Up to 16 timers are provided in the
controller (with 4 combined outputs).
They can be used to trigger various
internal functions as well as external
devices. Please refer to a separate
chapter for detailed information.
Timer channel 1
Timer channel 2
Timer channel 3
Timer channel 4
Timer channel 5
Timer channel 6
Timer channel 7
Timer channel 8
Timer channel 9
Timer channel 10
Timer channel 11
Timer channel 12
Timer channel 13
Timer channel 14
Timer channel 15
Timer channel 16
TIMERACT 1-4
TIMERACT 5-8
TIMERACT 9-12
TIMERACT 13-16
TIMERACTIVECOM
TIMER BLOCK 1
TIMER BLOCK 2
TIMER BLOCK 3
TIMER BLOCK 4
TIMER BLOCK 5
TIMER BLOCK 6
TIMER BLOCK 7
TIMER BLOCK 8
TIMER BLOCK 9
TIMER BLOCK 10
TIMER BLOCK 11
TIMER BLOCK 12
TIMER BLOCK 13
TIMER BLOCK 14
TIMER BLOCK 15
TIMER BLOCK 16
User Buttons
AA
It is possible to use up to 16 user
buttons. User buttons can be for example
assigned to software buttons in
InteliVision displays. Pressing of
corresponding button then activates the
output with function that is chosen in the
configuration. For more information on
how to use User Buttons please refer to
a separate chapter.
UserBtn pulse
USER BUTTON 1
USER BUTTON 2
USER BUTTON 3
USER BUTTON 4
USER BUTTON 5
USER BUTTON 6
USER BUTTON 7
USER BUTTON 8
USER BUTTON 9
USER BUTTON 10
USER BUTTON 11
USER BUTTON 12
USER BUTTON 13
USER BUTTON 14
USER BUTTON 15
USER BUTTON 16
User
Configurable
protections
AA
There are several prepared user
configurable protections in default
archive. Please refer to a separate
chapter for complex step-by-step
instructions on user configurable
protections.
Batt >V
Batt <V
Batt volt del
Mains I unbal
Mains Iunb del
Mains V unbal
Mains Vunb del
Bus V unbal
Bus Vunb del
User Mask
AA
It is possible to use four separate Logical
Binary Inputs to show or hide particular
objects in InteliVision 5 and 8. It is
possible to use these inputs to show
particular screens in InteliVision 5. For
more information on this function please
refer to the separate chapter.
USER MASK 1
USER MASK 2
USER MASK 3
USER MASK 4
i
i
i
i