CommScope Era CAP M 9 - Mount the CAP M to a 4 to 18 Pole

M0201AJB Era
™
Medium Power Carrier Access Point Installation Guide
© October 2018 CommScope, Inc. Page 35
Installing CAP Ms
11 OnlowerrightoftheCAPM-1,reinstalltheM6x12screwanditswashersthatyouremovedinStep7on
page33.
a SlidefirsttheM6split-lockwasherandthentheM6plainwasherovertheM6x12screw.
b InserttheM6x12screwthroughthescrewholeshownbelow,andscrewitbackintotheCAPM-1
chassis;torqueto11N-m.
12 RepeatStep11ontheleftsideoftheCAPM-1.
M6x12 screw and
washer set in hole
closest to the
mounng surface