Chapter 7 Configuring Your Wide Area Network
32
7.2 Setup on Compex CGX3224 for Broadband Internet Access
For such services, you should have the IP address info ready before proceeding. This is
provided by the ISP.
1. Connect a network cable from the Ethernet port of Compex CGX3224 to your
workstation.
2. Connect an Ethernet cable from Ethernet port of CGX3224 to the ADSL/Cable
modem.
3. Power on the broadband modem and wait for broadband modem to complete the
initialization process. That may take about 1 minute or more, depending on the
brand and design of individual modems.
4. Next, power on both your workstation and Compex CGX3224. The LINK/ACT
LED should light up, indicating that the connection has established.
5. You may start to configure Compex CGX3224 before connecting to the Internet.
Please refer to Chapter 5 “Configure Compex CGX3224 using Web-based
Interface” on Page 16.
6. Once everything is checked, you can now access to the Internet.
Workstation
CGX3224
Cable/ADSL Modem
Internet
To Next Page
Loading...
Need help?
General
