Chapter 8 Advanced Configuration for Compex CGX3224
57
8.9 Address Search
8.9.1 Host Search
Host Search is used for searching a host by IP address on the network, and
getting the port number to which the host is connected. It is useful while
configuring the VLAN. With this function, you can easily detect the port at
which a host is connected to, and have an idea about which ports should be
included in a VLAN.
Procedures
1. Go the Host Search from the Command window.
2. Enter the Host IP Address and click on Search button
The result will display as shown below.
To Next Page
Loading...
Need help?
General
