Chapter 9 Using SYSTEM TOOLS Menu
65
4. Next, the screen will display " Default password restored successfully".
This indicates that the system has successfully reset the password to
default setting.
5. Type in reboot to switch your Compex SGX3226 to normal mode.
This time, you can enter the default password, which is password to
login to the configuration page.
You may change your password using Hyper Terminal program by typing the
command, sys set password and hit Enter key from your keyboard. If you
cannot remember the command, type in help and the command listing will be
listed.
9.6 Upgrading Compex CGX3224 Firmware
You can simply download the newer version Firmware from
http://www.compex.com.sg. Here, you will find links that allow easy access for
upgrading of future released updated firmware.
To check your current firmware version, refer to Section 9.4 on "System Information”
on Page 63. Once you downloaded the latest firmware, saved it into your hard disk.
To Next Page
Loading...
Need help?
General
