Chapter 9 Using SYSTEM TOOLS Menu
66
Procedures
1. Go to Firmware Upgrade from the Command window.
2. Click Browse button to select the file where you have just saved.
3. Next, click on the Upgrade button to start replacing the latest firmware revision.
The system will prompt you to reboot Compex CGX3224. Click Yes button to restart
the device.
Log on to the web site after 30 seconds if you still need to do some configuration on
Compex CGX3224.
9.7 Save or Reset Settings
The Save and Reset Settings allow you to execute the amendments or reset to the default
settings.
To Next Page
Loading...
Need help?
General
