3. Hardware Setup
3.
Hardware Setup
Before Using the PANECON-PC for the First
Time
Follow the next steps to set up the PANECON-PC:
STEP1 Install the hard disk and expansion main memory
(DIMM) and set jumper switches.
By referring to the information in this chapter, set the
PANECON-PC.
STEP2 Connect cables.
Connect necessary external devices, such as a printer
and a CRT, to the PANECON-PC using appropriate
cables.
STEP3 Turn on the power.
After verifying that you have correctly followed steps
1 and 2, turn on the power. If you feel something is
wrong after turning on the power, turn off the power
immediately and check to see if the PANECON-PC
has been set up correctly.
STEP4 Set up BIOS.
By referring to Chapter 4, set up BIOS. This setup
requires a keyboard and a display.
* Before using the PANECON-PC, be sure to execute "
LOAD SETUP DEFAULTS" to initialize the BIOS
settings to their default values.
(See Chapter 4, "Main Menu.")
Note!
If your PANECON-PC is an OS preinstalled model, be sure
to connect the keyboard and mouse to it before turning the
power on for the first time.
User’s Manual
17
To Next Page
Loading...
Need help?
General
