5. Each Component Function
Power Supply to the Card
The voltage that can be used and the current capacity of each slot are
as shown below:
Table 5.15. Power Supply to the Card
Voltage Current capacity (Max.)
+5V 1A/Slot
+3.3V 1A/Slot
+12V Not supplied.
DVI Interface
A DVI interface is provided. Using the bundled DVI-analog RGB
adapter allows a CRT monitor with DB-15 connector to be connected to
the IPC-PT/x630x(PCI).
The connector is named DVI (DVI-I 29-pin
connector).
Table 5.16. DVI Connector
Connector DVI-I 29pin
1
8
17
24
16
9
C1
C2
C3
C4
C5
Pin No. Signal Pin No. Signal Pin No. Signal
1 N.C. 13 N.C. C1 RED
2 N.C. 14 +5V C2 GREEN
3 N.C. 15 GND C3 BLUE
4 N.C. 16 HPD C4 HSYNC
5 N.C. 17 N.C. C5 GND
6 DDC CLK 18 N.C.
7
DDC
DATA
19 N.C.
8 VSYNC 20 Reserved
9 N.C. 21 Reserved
10 N.C. 22 N.C.
11 N.C. 23 N.C.
12 N.C. 24 N.C.
62
User’s Manual
To Next Page
Loading...