Contec IPC Series User Manual

3. Hardware Setup
Fastening the Power Cable
Removing the Screw on the Metal Brace to Keep the AC Cord in
Place
In order to install the metal brace, temporarily remove the machine
screw on the front left end.
Remove this screw.
Figure 3.7. Removing the Screw
Installing the AC Cord Metal Brace and the Clamp
Insert the AC cord all the way into the inlet. Fasten the AC cord
metal brace using the screw you removed earlier. Attach the clamp
to an appropriate location on the metal brace to clamp the cord. The
“AC cord metal brace” is attached to the main case.
Attach
Figure 3.8. Installing the AC Cord Metal Brace and the
Clamp
26
User’s Manual

Contec IPC Series Specifications

General

Brand	Contec
Model	IPC Series
Category	Desktop
Language	English