3. Hardware Setup
<Board type with a double socket on its front>
This product has a double socket on the front of its circuit board.
Standard memory is installed in the lower socket. To add more
memory, install it to the upper socket.
SO-DIMM Disconnection Procedure
Open the levers on both sides slightly to the left and right. You
should be able to remove the DIMM.
Lever
Figure 3.6. Uninstalling the SO-DIMM
Note!
The SO DIMM socket plugging/unplugging life is 30 times. The
operation of an SO DIMM socket is not guaranteed once an SO
DIMM has been plugged and unplugged more than 30 times.
User’s Manual
25