4. BIOS Setup
Primary Slave : Set the type of HDD(SDD) to be used as
the second drive. Selecting this field
changes the screen to the submenu for
manually setting drive configuration
data such as the number of cylinders.
This field is set to [Auto] by default.
You can leave it intact for normal use.
Secondary Master : Normally, connection is not allowed.
Set this field if you have connected a
CD-ROM drive to the secondary IDE
connector.
Secondary Slave : Connection not allowed. Set to "None."
Boot Features : This field launches the Boot Features
submenu to enable or disable the
options for checking the floppy disk
drive and keyboard upon system boot.
(See Boot Features Windows.)
System Memory : Displays the detected amount of
memory installed on the system.
Extended Memory : Displays the detected amount of
memory installed on the system.
User’s Manual
33