4. BIOS Setup
BIOS DDC : Specify whether to enable or disable
DDC. Plese set to [Enabled].
Start Wait : Sets the wait time for the startup of
BIOS and enables timing adjustment for
devices connected to the main unit.
[Disabled], [5sec], [10sec], [15sec],
[20sec], [25sec], or [30sec] can be
selected. When [Disabled] is selected,
there is no wait time. (It means the same
as “0sec”.)
Select [Disabled] under normal
conditions, which is the default setting.
User’s Manual
37
To Next Page
Loading...