Contec IPC Series User Manual

4. BIOS Setup
Fields available with Parallel port set to [Enabled]
Base I/O address
Set to base I/O address.
Interrupt
Set to IRQ.
Mode
Set to parallel port's operating mode.
DMA channel
This is the DMA channel setting used
when ECP is selected during
parallel-port mode setting.
Floppy disk controller : Enable or disable the on-board floppy
disk controller.
Normally, set to default.
User’s Manual
39

Contec IPC Series Specifications

General

Brand	Contec
Model	IPC Series
Category	Desktop
Language	English