Control Techniques Epsilon EP-P User Manual

Epsilon EP-P Drive Reference Manual 55
Revision A4 www.controltechniques.com
3.16.5 Drive Fault Log Tab
Figure 57: Faults View - Drive Fault Log Tab
The Drive Fault Log tab is visible when online and consists of a list of the ten most recent faults detected by the drive. These
are saved in the drive’s non-volatile memory to be preserved during power cycles. Faults are listed in reverse order of
occurrence so that the most recent is listed first.
Fault Code
The fault code has the same description of the fault that is or was reported in the Active Faults window.
Power Up (Counts)
This is the Drive Power Up Counts when the fault was detected.
Time (Hours.Minutes)
This is the Drive Power Up Time when the fault was detected.
3.17 Setup NVM View
At power-down, parameters can be saved to Non-Volatile Memory (NVM). See the “How Communications Work” section of the
“Operational Overview” chapter for more details. In PowerTools Pro, you can customize which parameters will be saved in
non-volatile memory.
Figure 58: Setup NVM View

Control Techniques Epsilon EP-P Specifications

General

Brand	Control Techniques
Model	Epsilon EP-P
Category	Servo Drives
Language	English