Control Techniques UD70 User Manual

UD70
Issue code: 70nu2
Features 8-19
_Q40% Return position
Units Encoder lines
Range –2
31
to 2
31
Default -----
Reset H = S/V S = N/A P = N/A
When switching out of digital lock and into position control mode
(_Q32%.2 from 1 to 0), _Q40% is written to the main position reference
_Q2%. The axis will therefore return to the position given by _Q40%. The
automatic write can be disabled by setting _Q32%.29 = 1.

Control Techniques UD70 Specifications

General

Brand	Control Techniques
Model	UD70
Category	Control Unit
Language	English