Control Techniques UD70 User Manual

UD70
Issue code: 70nu2
3-8 Getting started
Note
The UD70 can hold only one compiled program (ie. .BIN file)
in memory at one time. A program that is downloaded to
the UD70 will over-write an existing program.
Running the program
Warning
The Sawtooth program rapidly alters the speed
reference parameter of the Drive. For safety, ensure
the Drive is disabled before running the program.
In the Task Manager toolbar, click on
The Speed referenceSpeed reference parameter #1.21 #1.21 in the Drive will change value.
Note that the ramping-up behavior cannot be observed since the
program alters the parameter value at a faster rate than the display is
updated.

Control Techniques UD70 Specifications

General

Brand	Control Techniques
Model	UD70
Category	Control Unit
Language	English