26 • DM-NVX-36x(C) Encoders/Decoders Product Manual – DOC. 8879C
• In the DM NAX (AES67) Receive Advanced section, set the Auto Initiation toggle
switch in the On (right) position or Off (left) position. By default,
Auto Initiation
is set to
On. If Auto Initiation is set to Off, start or stop the stream as desired.
The following AES67 audio stream information is displayed: status, encoding
format, encoding sample rate, bit rate, and number of channels.
Settings Tab - DM NAX (AES67) Audio Configuration in Transmitter Mode
For additional information, refer to the online help of the web interface.
To Next Page
Loading...
