Cube HYDE - Quick Menu; Start Page

English – 4
– <Information>
You can find the following menu items here:
▪ <Contact>
You can find contact details for Bosch eBike Systems
here.
▪ <Certificates>
You can find certificates and eLabels here.
Leaving the Settings Menu
Press the button to save the settings and
leave the settings menu.
Press and hold the or button for more
than one second to leave the settings menu
without saving the settings.
Press the button to save the settings and
leave the settings menu.
Press and hold the button for more than one
second to leave the settings menu without sav-
ing the settings.
Quick Menu
Selected settings are displayed on the quick menu. These
settings can also be changed while riding.
You can access the quick menu by pressing and holding
(>1s) the select button .
It cannot be accessed from the status page.
The following settings can be changed via the quick menu:
– <Ride>
All data on the
journey so far is reset to zero.
– <eShift> (optional)
The settings vary depending on the gearing in question.
For example, you can set your cadence here, provided
that the gearing supports this function.
– <Navigation>
You can select your recent destinations as a new destina-
tion and/or end the running navigation.
Note: Other functions may be available depending on your
eBike equipment.
Start page
If you did not select another page before the last time you
switched off, you will be shown this page when you switch
on the eBike.
eMTB
80%
SPEED km/h
22.7
a
c
i
j
k
l
m
b
n
a
eBike battery state of charge (can be configured)
Note: For eBikes with assistance up to45km/h, the
speed is always shown here.
b
Riding mode
c
Bicycle lights
i
Unit of speed indicator
j
Indicator name
k
Your performance
l
Speed
m
Drive power
n
Navigation bar
The indicatorsatoc form the statusbar and are shown on
every page.
The navigation barn briefly indicates which page you are on.
You can access additional pages from the start page. The
statistical data, eBike battery range and average values are
displayed on these pages.
If you are on a different page to the start page when the
eBike is switched off, the most recently displayed page will
appear again when the eBike is switched on.
Press the button or button to scroll
through the pages.
Briefly press the select button to scroll
through the pages.
<Display configuration>
<Display configuration>can be found in theeBike Flow
app under<Settings>→<My eBike>. The eBike must be
switched on and the smartphone must be connected.
The on-board computer display can be customised via<Dis-
play configuration>:
–
Change the order of individual screens
0 275 007 3BK | (26.04.2024) Bosch eBike Systems