Cube HYDE - Shimano STI; Sram Force; Rival; Red

|
43
OPERATING INSTRUCTIONS
8.6.4 Shimano STI
On your gear-shift there are two levers. Lever
A – this is also the brake lever - is for shifting
to a larger chain ring or sprocket and Lever B
is for shifting to a smaller one.
1. Here is how you shift to a larger sprocket:
•
In order to shift you must be pedalling.
•
Press Lever A down with your thumb bey-
ond the rst stop and keep it depressed until
the desired gear is engaged.
•
For rapid shifting through several sprockets,
press Lever A right down and keep it de-
pressed until the desired gear is engaged.
A
B
8.6.5
Sram Force / Rival / Red
On your gear shifter/brake lever, you will
nd a lever which can be used to switch to
both a lower and higher gear.
1. In order to switch to a higher gear, please
do the following:
•
To switch gears, you must pedal.
•
Press the gear shifter inwards and hold
down until the desired gear has been
selected.
•
To switch through several gears, press the
lever down fully and hold down until the
desired gear has been selected.
2. In order to switch to a lower gear, please
do the following:
•
to switch gears, you must pedal.
•
Press the lever until you feel it coming to a
stop and then let it go again.
2. Here is how you shift to a smaller spro-
cket:
•
In order to shift you must be pedalling.
•
Depress Lever B until you feel it engage and
then let it go again straight away.
A B