Cube HYDE - Adjust Rear Suspension; Service the Gear

|
39
OPERATING INSTRUCTIONS
8.5 Adjust rear suspension
(on full suspension bikes)
1. Please read the instructions for adjusting
your suspension/damper elements in the
suspension fork manufacturer‘s parts
instructions. Please consult your dealer.
2. Adjust your suspension/damper element
so that the bike when carrying the rider‘s
weight deects equally at the front and
rear wheels.
8.6 Service the gears
Risk of Personal Injury and Material
Damage!
Incorrect operation of the gear shift le-
vers can damage your gears.
•
Never operate both levers or both gear shift
switches at the same time!
•
Please note that for the crank set (left-hand
lever) and hub gears: never shift if there is
a load!
1. Please determine which gear shift system
your bike has on the basis of the illustra-
tions,. If you are not sure which one it is
please consult your dealer.
2. If your gear shift lever is not shown in the
illustrations, please refer to the accom-
panying gear shift lever manufacturer‘s
instructions and/or consult your dealer.
Shimano Rapidre 2-Way-Release_Deore
Shimano Rapidre 2-Way-Release_XT
Twist Grip Shift