Cube HYDE - Splash Guard

54
|
OPERATING INSTRUCTIONS
Problem Possible causes Corrective action
The seat post slips into
the frame or twists out of
position.
Incorrect assembly
The diameter of the seatpost is
too small
Dismantle and assemble correctly according
to point 11.2
Assemble a seatpost with the correct
diameter
Poor suspension response Suspension has been set
incorrectly
Adjustment according to the accompanying
parts manual
Poor suspension response
despite being adjusted
correctly
Suspension
damaged
Contact a specialist workshop immediately.
Problem Possible causes Corrective action
Noises: Creaking, knocking,
grinding or other.
Splash guard or carrier parts loose Contact a specialist workshop immediately.
Lighting system partly or
totally dysfunctional
Lighting elements (bulbs, LEDS)
burnt out
Replace lighting elements. Please consult
your dealer.
Wiring damaged Contact a specialist workshop immediately.
Dynamo defective
9.4 Splash guard, carrier and lighting system
Risk of Personal Injury and
Material Damage!
Splash guard, carrier and lighting system faults may lead to dangerous riding conditions, falling,
accidents and material damage.
•
At the slightest malfunction, contact your dealer immediately.
•
Only ride the bike again after it has been properly readjusted by the dealer.