Cube HYDE - Product Description and Specifications; Product Features; Certification Information

English – 2
pected the battery has been swallowed
or placed inside any part of the body.
Privacy notice
When you connect the eBike to theBosch DiagnosticTool3
or replace eBike components, technical information about
your eBike (e.g. manufacturer, model, bike ID, configuration
data) and the eBike usage (e.g. total riding time, energy con-
sumption, temperature) is transferred to Bosch eBike Sys-
tems (Robert Bosch GmbH) for the purposes of processing
your inquiry, servicing and product improvement. You can
find further information about data processing at
www.bosch-ebike.com/privacy-full
.
Note: To improve readability, some values are displayed
without decimal places. These values have been rounded up
or down.
Product Description and
Specifications
Intended Use
TheIntuvia 100 on-board computer is designed to display
cycling data on an eBike from the system generation the
smart system.
So as to be able to use the full functionality of the eBike and
theIntuvia 100 on-board computer, a compatible smart-
phone with theeBike Flow app is required.
Depending on the smartphone's operating sys-
tem, theeBike Flow app can be downloaded
free of charge from the Apple App Store and
the Google Play Store.
Use your smartphone to scan the code in order
to download theeBike Flow app.
Product Features
The numbering of the components shown refers to the illus-
trations on the graphics pages at the beginning of the
manual.
(1)
Bluetooth® button
(2)
Battery compartment cover
(3)
Locking screw support
(4)
On-board computer contact
(5)
Reset button
(6)
Locking screw for on-board computer
(7)
Holder for on-board computer
(8)
On-board computer cradle
(9)
On-board computer
(10)
Battery compartment
(11)
Holder fastening screw
(12)
Slotted screwdriver
a)
(13)
Non-rechargeable battery
(coin cell type CR2450)
(14)
Rubber seal
a) Not included in the scope of delivery
Display Elements of On-Board Computer
(a)
Charge indicator of the eBike battery
(b)
Bike light indicator
(c)
Riding mode indicator
(d)
Drive unit assistance indicator
(e)
Unit indicator
(f)
Text indicator
(g)
Navigation bar
(h)
Value indicator
(i)
Speedometer
Technical Data
On-board computerIntuvia 100
Product code BHU3200
Operating temperature
A)
°C –5to+40
Storage temperature °C +10to+40
Battery 3V,
1×CR2450
Protection rating IP55
Weight, approx. g 63
Bluetooth® Low Energy 5.0
– Frequency MHz 2400–2480
– Transmission power mW ≤1
A) Temperatures outside of this range may cause faults in the dis-
play.
The licence information for the product can be accessed at the follow-
ing Internet address: www.bosch-ebike.com/licences
Declaration of Conformity
Robert Bosch GmbH, Bosch eBike Systems, hereby declares
that theIntuvia 100radio communication unit complies
with Directive 2014/53/EU. The full text of the EU Declara-
tion of Conformity can be accessed at the following Internet
address: www.bosch-ebike.com/conformity
.
Robert Bosch GmbH, Bosch eBike Systems, hereby declares
that the Intuvia 100 radio communication unit complies
with the Radio Equipment Regulations 2017 (SI
2917/1206). The full text of the UK Declaration of Conform-
ity can be accessed at the following Internet address:
www.bosch-ebike.com/conformity.
Certification information
To display the certification numbers (e‑labels), press and
hold the Bluetooth®button(1) until <Certifications> shows
on the on-board computer. Release the Bluetooth®but-
0 275 007 3BI | (23.02.2024) Bosch eBike Systems