Cube HYDE - Brake; Frame and Suspension; Corrective Action

|
53
OPERATING INSTRUCTIONS
9.2 Brake
Risk of Personal Injury and
Material Damage!
The brakes on your bike are amongst the most important parts when it comes to your safety.
Incorrectly functioning brakes can lead to dangerous riding conditions, falling, accidents and
material damage.
•
At the slightest problem and if the braking eect deteriorates, contact your dealer immediately.
•
Only ride the bike again after it has been properly readjusted by the dealer.
Problem Possible causes Corrective action
Brakes do not function Brake not correctly assembled Correct assembly as per Chapter 11.1
Brake damaged Contact a specialist workshop imme-
diately.
Reduced braking eect, brake
levers have to be pulled too far.
Worn brake blocks or brake pads Have brake blocks or brake pads
replaced immediately in a specialist
workshop.
Brake cable stretched, worn or
clamp/s damaged
Contact a specialist workshop imme-
diately.
On hydraulic brakes, brake system
leaking
Contact a specialist workshop imme-
diately.
9.3 Frame and suspension
Risk of Personal Injury and
Material Damage!
Frame and suspension faults may lead to dangerous riding conditions, falling, accidents and mate-
rial damage.
•
At the slightest malfunction, contact your dealer immediately.
•
Only ride the bike again after it has been properly readjusted by the dealer.
Problem Possible causes Corrective action
Noises: Creaking, knocking,
grinding or other.
Frame and/or suspension
damaged
Contact a specialist workshop
immediately.
The seat post slips into the frame
or twists out of position.
Tightening torque too low Check and correct the tightening
torque (see chapter 3.3).
In the case of frames and/or seat
posts
made of carbon
Contact a specialist workshop imme-
diately.