Cube HYDE - Product Description and Specifications; Product Features

English – 2
Product Description and
Specifications
Intended Use
ThePurion200operating unit is designed for controlling an
eBike and, as an option, for controlling an additional on-
board computer from the system generationthe smart sys-
tem. If you use your smartphone as an on-board computer,
you can use thePurion200operating unit to also control
theeBike Flowapp.
So as to be able to use the operating unit fully, a compatible
smartphone with the eBike Flow app is required.
ThePurion200operating unit can be connected to your
smartphone via Bluetooth®.
Depending on the smartphone's operating sys-
tem, theeBike Flow app can be downloaded
free of charge from the Apple App Store and
the Google Play Store.
Use your smartphone to scan the code in order
to download theeBike Flow app.
Product Features
The numbering of the components shown refers to the illus-
trations on the graphics pages at the beginning of the
manual.
All illustrations of bike parts except for the drive unit, on-
board computer (including operating unit), speed sensor
and the corresponding holders are a schematic representa-
tion and may differ on your eBike.
(1)
On/off button
(2)
Display
(3)
Ambient light sensor
(4)
Select button
(5)Button for increasing the assistance level +/
bicycle lights
(6)Button for reducing the assistance level –/
walk assistance
(7)
Holder
(8)
Fastening screw
(9)
Diagnostics connection (for servicing purposes
only)
(10)
Scroll to the left button
(11)
Scroll to the right button
Technical Data
Operating unitPurion 200
Product code BRC3800
Max. charging current of USB
port
A)
mA 600
USB port charging voltage
A)
V 5
USB charging cable
B)
USB Type-C®
C)
Charging temperature °C 0to+40
Operating temperature °C –5to+40
Storage temperature °C +10to+40
Diagnostic interface USB Type-C®
C)
Internal lithium-ion battery V
mAh
3.7
75
Protection rating IP55
Dimensions (without fastening) mm 85×54×60
Weight g 49
Bluetooth® Low Energy 5.0
– Frequency MHz 2400–2480
– Transmission power mW 1
A)
Specification for charging thePurion200operating unit; ex-
ternal devices cannot be charged.
B)
Not included with the product as standard
C) USBType-C® and USB-C® are trademarks of USB Implementers
Forum.
The licence information for the product can be accessed at the follow-
ing Internet address: www.bosch-ebike.com/licences
Declaration of Conformity
Robert Bosch GmbH, Bosch eBike Systems, hereby declares
that thePurion200radio communication unit complies with
Directive 2014/53/EU. The full text of the EU Declaration of
Conformity can be accessed at the following Internet ad-
dress: www.bosch-ebike.com/conformity.
Robert Bosch GmbH, Bosch eBike Systems, hereby declares
that the Purion200 radio communication unit complies with
the Radio Equipment Regulations 2017 (SI 2917/1206).
The full text of the UK Declaration of Conformity can be ac-
cessed at the following Internet address:
www.bosch-ebike.com/conformity
.
Certification information
Certification numbers (e-labels) can be found in the status
screen under <Settings>→ <Information>→ <Certific-
ates>. Scroll through all e-labels by briefly pressing the
scroll on button(11).
Note: If you wish to access information from the e-label of
Purion200, you may first have to remove any additional on-
board computer or, if using a smartphone, close the ride
screen in the eBike Flow app.
0 275 007 3RP | (02.05.2024) Bosch eBike Systems