Cube HYDE - Page 936

English – 5
– Status screen: The status of the connected devices is
shown here.
– Distances screen
– Rides screen
– Range screen
– eBike battery screen
– Power screen
– Cadence screen
– Total distances screen
– ABS screen (optional)
<Display configuration>
<Display configuration>can be found in theeBike Flow
app under<Settings>→<My eBike>. The eBike must be
switched on and the smartphone must be connected.
The on-board computer display can be customised via<Dis-
play configuration>:
– Change the order of individual screens
– Add new screens
– Edit and partially delete existing content
– Add new screen content after an update
You can find further information on<Display configura-
tion> at any time in theeBike Flow app.
Selecting the Riding Mode
You can set how much the eBike drive assists you while ped-
alling on the operating unitusing the increase assistance
level +(5) and reduce assistance level –(6) buttons. The
riding mode can be changed even while cycling, and is dis-
played in colour.
Riding
mode
Notes
OFF
Drive assistance is switched off. The eBike can
just be moved by pedalling, as with a normal bi-
cycle.
ECO
Effective assistance with maximum efficiency,
for maximum range
ECO+
Range-optimised riding mode that only
switches on the drive assistance above a cer-
tain rider performance; for natural cycling and
for a maximum range
TOUR
Steady assistance, long range for touring
TOUR+
Dynamic assistance for natural, sporty cycling
eMTB
Optimal assistance whatever the terrain, rapid
acceleration when starting from a standstill, im-
proved dynamics and top performance
SPORT
Powerful assistance, for mountain biking and
for cycling in urban traffic
TURBO
Maximum assistance even at a high cadence,
for biking sports
AUTO
The assistance is dynamically adapted to the
riding situation.
RACE
Maximum assistance on the eMTB racetrack;
very direct response and maximum "Extended
Riding
mode
Notes
Boost" for the best possible performance in
competitive situations
CARGO
Steady, powerful assistance for safely trans-
porting heavy weights
SPRINT
Dynamic assistance according to cadence – for
athletic eGravel and eRoad cycling with rapid
sprints and frequent ascents
LIMIT
A)
Automatic and optimal adaptation of the assist-
ance to the riding situation up to a maximum of
25km/h for lower-speed and energy-saving
cycling with the S-Pedelec in urban traffic and
group trips with Pedelecs
A) Only for S-Pedelecs in the EU with Performance Line Speed
The activation of riding modeLIMIT does not alter the S-Pedelec
classification.
The designations and configuration of the riding modes can be pre-
configured by the manufacturer and selected by the bicycle retailer.
Note: The available riding modes depend on the respective
drive unit.
Adjusting the Riding Mode
The riding modes can be adapted within certain limits using
theeBike Flowapp. This gives you the option of adjusting
your eBike to your personal requirements.
It is not possible to create a completely new riding mode.
You can only adjust the riding modes that have been enabled
by the manufacturer or dealer on your system. This may be
fewer than four riding modes.
In addition, restrictions in your country may mean that it is
not possible to adjust a particular riding mode.
The following parameters are available for making adjust-
ments:
– Assistance in relation to the base value of the riding mode
(within the legal requirements)
– Drive response
– Top limit speed (within the legal requirements)
– Maximum torque (within the limits of the drive)
Note: Please ensure that your modified riding mode retains
the position, name and colour on all on-board computers
and controls.
Interaction between the drive unit and gear-
shifting
The gear shifting should be used with an eBike in the same
way as with a normal bicycle (observe the operating instruc-
tions of your eBike on this point).
Irrespective of the type of gear shifting, it is advisable that
you briefly reduce the pressure on the pedals when changing
gear. This will aid gear shifting and reduce wear on the
powertrain.
By selecting the correct gear, you can increase your speed
and range while applying the same amount of force.
For this reason, follow the gear change recommendations
displayed on your on-board computer.
Bosch eBike Systems 0 275 007 3RP | (02.05.2024)