APPENDIX C — PROGRAMMING DEVICES FOR THE 1351
pg. 135
Return to TOC Curtis Model 1351 – December 2018
Curtis 1313 handheld programmer
e Curtis 1313 handheld programmer (1313 HHP) is a self-contained parameter programmer
and diagnostic tool for the 1351 system controller. e model required uses the CANbus. e 1351
system controller does not support the serial-based 1313 HHP. e generic CANbus 1313 HHP is
model 1313-xx31. It has the blue band. Its operation is fully explained in the 1313 HHP user’s manual,
CANbus 1313 HHP, 53225 Rev A 3/18, downloadable from the Curtis website*.
e 1313 HHP can upload new soware to the 1351, yet it does not upload VCL programs.
1313 HHP
* Contact your Curtis distributor or the regional Curtis sales office to obtain the Curtis Software Suite
TM
and the 1313 HHP. Consult
with your Curtis support engineer for help or training with the setup and using these tools and the 1351 System Controller.
To Next Page
Loading...
Need help?
General