Custom Audio Electronics TK303 User Manual

Printing head
1
Disconnect the power supply cable and open the upper
device covers (see previous paragraphs).
2
Clean the printing head by using
a non-abrasive cloth moistened with isopropyl.
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
ISOPROPYL ALCOHOL
Platen roller
1
Disconnect the power supply cable and open the upper
device covers (see previous paragraphs).
2
Clean the platen roller by using
a non-abrasive cloth moistened with isopropyl.
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
ISOPROPYL ALCOHOL
106

Custom Audio Electronics TK303 Specifications

General

Brand	Custom Audio Electronics
Model	TK303
Category	Printer
Language	English