Triple feeder
1
2
3
Insert the edge with the rounded corners of the ticket of
the cleaning kit in each of the three feeders until it
comes out from the triple feeder a few of centimeters.
Contact the customer service
for the cleaning kit for the triple feeder.
Disconnect the power supply cable and open the upper
device covers (see previous paragraphs).
4
Pull out the ticket of the cleaning kit
by sliding it into the triple feeder.
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
Alcohol, solvent
Customer Service DepartmentCustomer Service Department
108
To Next Page
Loading...
