Cutera Excel HR - Additional Ocular Protection

51
EXCEL HR OPERATOR MANUAL
D1796, REV. D, 12/16
2. Close the treatment room door during operation of the system.
3. External door interlocks that automatically disable the system when the treatment room
door is opened may be installed.
A blocking barrier, screen or curtain capable of blocking or filtering
the
treatment beam may be placed to create a controlled area
inside a large treatment room. The barrier should be made of
material that can withstand the power of the treatment beam for the
maximum exposure time, relative to the configuration of the
controlled area and the treatment parameters for the specific
medical application.
Depending on the procedure, the physician must protect the patient’
s eyes with either laser safety
eyewear or with diffuse metal eye shields. Apply wet gauze over the eye lid when using metal eye
shields.
Additional Ocular Protection
Never substitute non-laser prescription eyewear for the appropriate
laser safety eyewear, as severe damage could occur.
Use caution when performing procedures around the eyes. Severe
and
irreversible eye damage may occur from direct or indirect
exposure to treatment beams.
Never look directly into any optical lens, optical fiber, handpiece
or
system aperture while the system is energized. Severe eye damage
could occur. Turn off the system before inspecting any handpiece or
system component.
NOTE
WARNING
WARNING
WARNING