EasyManua.ls Logo

Cutera Excel HR - Wrinkle Treatment Guidelines - 1064 Nm Only

Default Icon
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
77
EXCEL HR OPERATOR MANUAL
D1796, REV. D, 12/16
Always observe the epidermis during the treatment, watching for signs of damage (e.g.,
epidermal separation, frosting, or gray coloration).
- If damage is observed, stop the treatment, cool the skin, and evaluate the area for
possible complications and wound care.
Seborrheic keratoses may only be lightened after treatment and may recur
.
- Use caution and less aggressive settings when treating flatter
seborrheic keratoses.
Wrinkle Treatment Guidelines - 1064 nm Only
The following parameters and techniques are provided as a guide only and are based on practitioner
feedback. Observe laser-tissue interaction and clinical endpoints to determine appropriate parameters.
Protocol
Spot
Size
Fluence
Repetition
Rate
Pulse
Duration
Window
T
emperature
A
Low Energy,
Short Pulse Duration
7 mm 5-8 J/cm² 2 Hz 0.3-1.0 ms 20°C
B
Moderate Energy,
Medium Pulse Duration
5 mm 14-18 J/cm² 2 Hz 5 ms 12-20°C
C
High Energy,
Long Pulse Duration
10 mm 40-50 J/cm² 1 Hz 50 ms 4°C
Selection of protocol is based on operator preference and patient
comfort.
Multiple passes are required.
Protocol A: 10+ passes; clinical endpoint of mild erythema will develop slowly
.
Protocol B: 2 to 5 passes; clinical endpoint of mild erythema will develop after several
passes.
Protocol C: 1 to 3 passes; erythema will develop following the first pass.
Treatment
discomfort will be higher on the second pass, and mild edema will develop. Do not exceed 3
passes.
Wrinkle Treatment Protocols

Table of Contents

Related product manuals