1
EXCEL HR OPERATOR MANUAL
D1796, REV. D, 12/16
Operation
Introduction
The Cutera excel HR is a dual-wavelength (755 nm Alexandrite and 1064 nm Nd:YAG) laser system that
treats a wide range of dermatologic conditions requiring selective photothermolysis of target
chromophores. This operator manual describes the use and operation of the excel HR, including the
permanently attached handpiece.
Cutera lasers and handpieces are precision medical instruments.
They have undergone extensive
testing and, with proper handling, are useful and reliable clinical instruments. If you have any questions
regarding your laser and/or handpiece(s), contact your local Cutera representative.
Any laser device can generate highly concentrated light, which may
cause
injury if improperly used. To protect patients and operating
personnel, read and comprehend this entire operator manual,
including the Safety and Regulatory chapter, before operation.
Characteristics of the 755 nm Alexandrite Laser Beam
The 755 nm laser wavelength falls in the near infrared region of the electromagnetic spectrum. This
wavelength is invisible to the human eye; therefore, a low power, visible aiming beam that is coaxial with
the invisible treatment beam is used to target tissue. The Alexandrite laser light is absorbed by
hemoglobin and melanin in target tissues. This makes the 755 nm laser useful for treating multiple
indications. See the Clinical Applications section for specific Indications for Use for the 755 nm
wavelength.
WARNING
To Next Page
Loading...
