CVC TECHNOLOGIES, INC. CVC 310 OPERATION MANUAL
Setting up and troubleshooting of electrical parts must be carried out by
qualified electrician or engineer. Power Box should not be opened without
permission, connections made by unauthorized personnel is prohibited.
During cleaning, avoid spattering water on the power box or any electric
component.
If cleaning or maintenance must be carried out when the equipment is in
operation, then all reasonable precautions must be taken to avoid personal
injury or equipment damage.
Always use safety steps for tasks above shoulder height.
Stop the machine immediately in the event of any machine malfunction.
Routinely check the machine for worn components and have them replaced.
3 - 7
To Next Page
Loading...
