D-Link DCS-935L - Configuration; Accessing the Web Configuration Utility

24D-Link DCS-935L User Manual
Section 4 - Conguration
Conguration
Accessing the Web Conguration Utility
AftersettingupyourDCS-935Lwitheitherthemydlink LiteapporZeroCongurationSetup,youarereadytouseyourcamera.Thecamera’sbuilt-in
WebcongurationutilityisdesignedtoallowyoutoeasilyaccessandcongureyourDCS-935L.
Enter the User name admin and the Password you created when setting up your camera. (If
youdidnotcreateapassword,thedefaultpasswordisblank.)Afterenteringyourpassword,
click OK.
Note: If you are directly connecting your PC to the camera, the default IP address is 10.255.255.1.
If the camera is connected to a router or network, a dierent IP address may have been assigned.
UseaWebbrowsertogotothewww.mydlink.com website, and sign in to your mydlink
account.Selectyourcamera,clickontheSettings tab, then click on Advanced Settings to
accessyourcamera’sWebcongurationutility.