D-Link DCS-935L - Time And Date

42D-Link DCS-935L User Manual
Section 4 - Conguration
Time and Date
Thissectionallowsyoutocongurethesettingsoftheinternalsystemclockforyourcamera.
Time Zone:
Daylight Saving:
Synchronize with
NTP Server:
Set the Date and
Time Manually:
SelecttheTime Zone for your region from the drop-down menu.
ChecktheboxtoenableDaylightSavingtime(DST)ifyourregionusesit.Select
Auto Daylignt Saving if you want the internal system clock to automatically
adjustthetime.SelectSet DST Manually ifyouwanttomanuallysettheoset
andthetimeperiodthatDaylightSavingtimeshouldbeineect.
ChecktheboxtoSynchronize with NTP(NetworkTimeProtocol)Server.Thiswill
synchronize your camera with the Internet time server that you select from the
drop-downmenu.SelecttheNTP Serverthatisclosesttoyourcamera’slocation.
If Synchronize NTP Server is not enabled, you can set the date and time for the
systemclockmanually.IfyouchecktheboxtoSet Date and Time Manually, you
will see the option to Copy Your Computer’s Time Settings.
Click Save Settings to save your changes.