D-Link DCS-935L

43D-Link DCS-935L User Manual
Section 4 - Conguration
Day/Night Mode
ThissectionallowsyoutocongurewhenDayandNightmodesareused.Daymodeusestheinfraredcutltertoprovideacorrectedcolorimage
for times where there is available lighting. Night mode moves the lter out of the way to use all available light, and turns on the IR LED illuminators
to allow for clear black and white video in dark areas with little to no light.
Auto:
Manual:
Always Day
Mode:
Always Night
Mode:
Day Mode
Schedule:
Click Auto to allow the camera to automatically switch between Day and Night
modes based on the amount of available lighting.
Click Manual in order to manually switch between Day and Night modes from
the Live Video page.
Click to allow the camera to always use Day Mode.
Click to allow the camera to always use Night Mode.
Click Day Mode Schedule and use the drop-down menus to set a schedule
foryourcamera.ThisallowsthecameratouseDaymodeduringthetimesyou
specify.ThecamerawillautomaticallyswitchtoNightmodeoutsidethetimes
you specify.
Click Save Settings to save your changes.